Tips
Simple operations in the power off state
0
When the “Network Control” is set to “On”, you can perform playback, or other operations through AirPlay, “Denon Hi-Fi Remote”. (v p. 82)
Simple operations for iPod/USB
0
When connected to the USB port, the Input Source automatically changes and playback begins. (“Listening to music on an iPod” (v p. 43), “Playing
files stored on USB memory devices” (v p. 47))
I only want to recharge my iPod
0
Connect the iPod to this unit when the unit power is on. Then turn the unit power off, and the iPod will continue to charge until fully charged. (v p. 45)
Changing or resetting the network environment
0
Prepare the provided “Quick Setup Guide”, and run Setup – “Quick Setup”. For detailed settings, run Setup - “Network” - Settings. (v p. 84)
Volume adjustment is difficult when using AirPlay or app operation, and the sound suddenly becomes too loud
0
Reducing the “Volume Limit” setting value (to around -50dB to -30dB) limits the volume setting from AirPlay or an app to an ideal range and makes it
easier to adjust the volume. (v
p. 77)
Contents
Connections Playback Settings Tips Appendix
91
Front panel Rear panel
Remote control
unit
Index
To Next Page
Loading...
