Denon DRA-100

o
Remote Play operations
Operations are different for each device, but the procedures for
preparing for Remote Play are the same. The preparation procedures
are shown below.
1
Turn on this unit.
0
Make sure that this unit is connected to the network.
2
Display the music file playback screen on DMC.
0
For PC, open Windows Media Player 12, etc.
0
For smartphones, switch to the music file playback mode.
3
Select the friendly name of this unit for the item that
sets the playback device on the playback screen.
0
The default Friendly Name of this unit is “Denon DRA-100”.
4
Start playing back a music file on DMC.
0
The function on this unit automatically switches to “Music Server”
and the Remote Play mark m appears on the display. Remote
Play starts.
0
Press o to exit Remote Play mode.
NOTE
0
During Remote Play, you cannot perform playback operations with this unit. Use
the DMC device for these operations.
Contents Connections Playback Settings Tips Appendix
61
Front panel Rear panel
Remote control
unit
Index