Denon DRA-100 - FPGA IC1501 Terminal Functions (Continued); IC1501 Terminal Functions Part 2

4
Enter the IP address of this unit in browser’s address
box.
For example, if the IP address of this unit is “192.168.0.2”, enter
“http://192.168.0.2”.
.
Please select the menu.
news(45)WikipediaYouTubeYahoo! JapanappleBonjour
http://192.168.0.2
NETWORK
FIRMWARE
q
w
A
Entering the IP address.
B
If you are using the Safari web browser, you can select “Bonjour”
and directly access the unit’s web control screen from the
overview section.
0
By adding this unit’s IP address to the browser’s bookmark, you can display
the web control screen using the bookmark function the next time you use
the browser. If you are using a DHCP server and “Network Control” is set to
“Off”, turning the power on/off changes the IP address (v p. 82).
5
When the top menu is displayed, click on the menu
item you want to operate.
.
Please select the menu.
NETWORK
FIRMWARE
e
r
C
Click when you setup network settings. (vGExample 1H)
D
Click when you update firmware.
Contents Connections Playback Settings Tips Appendix
63
Front panel Rear panel
Remote control
unit
Index