Denon DRA-100 - FL6300 A SMPS IC821, IC831 Details

General
Make various other settings.
Volume Limit
o
Make a setting for maximum volume
Limits the volume to ensure safe use of this product, and also makes it
easier to adjust the volume from AirPlay or an app to an ideal range.
-30dB / -15dB / 0dB(Full throttle) / Other (Default : -30dB)
When “Other” is selected, the volume upper limit can be set within the
range of -60dB - 0dB. Select the value using ui and then press ENTER
to enter the setting value.
0
When the maximum volume is set, if you increase the volume to the setting value
and press VOLUME d again, “Allow max volume?” is displayed. If you press
ENTER the maximum volume limit is canceled.
H/P Amplifier Gain
Set the gain of the headphone amplifier. Set this according to the
impedance of the connected headphones. It is recommended that this is
set on the “Low” side if the headphones have low impedance and on the
“High” side if they have high impedance.
Low
(Default):
Set the gain of the headphone amplifier to
“Low”.
Mid:
Set the gain of the headphone amplifier to
“Mid”.
High:
Set the gain of the headphone amplifier to
“High”.
NOTE
0
The headphone volume varies depending on the “H/P Amplifier Gain” setting.
Decrease the volume or mute the audio first if changing this setting while listening
to audio.
Contents Connections Playback Settings Tips Appendix
77
Front panel Rear panel
Remote control
unit
Index