3-3. Operation Info Mode
3-3.1. Actions
This mode enables the unit to display the accumulated operating time, power On count and each
protection count.
3-3.2. Starting up
While holding down buttons "
ZONE2 SOURCE
", "
SPEAKER
" and "
STATUS
" simultaneously, press the
power button to turn on the power.
Select the "
4. OP INFO
" using the "
TUNER PRESET +/-
" button, then press the "
STATUS
" button then
to conî™°rm.
3-3.3. Operations
Press the "
STATUS
" button after starting up this device in Operation Info mode.
The following information is displayed in the following order.
(1) Accumulated operating time
OP Time ______H
↑ Time display
"
STATUS
"
(2) Power On time
P.On Time______
↑ Time display
"
STATUS
"
(3) DC / ASO Protection count
DC:___/ASO:___
"
STATUS
"
(4) Thermal Protection (A/B) count
THM A:___/B:___
"
STATUS
"
(5) Current Protection count
Current:___
"
STATUS
"
(Returns to normal display)
Before Servicing
This Unit
Electrical Mechanical Repair Information Updating
109
To Next Page
Loading...
