Denon DVD-A1UDCI

11
DVD-A1UDCI
5. MECHA ASSY
(1) Cut the wire clamp band, then disconnect the connector wires. Remove the screws, then remove “MECHA ASSY” in
the direction of the arrow.
b When mounting the mechanism, adjust the position of the loader panel. (See page ***)
6. MIX AUDIO UNIT
(1) Remove the screws.
(2) Disconnect the connector board.
Proceeding : TOP COVER → SIDE COVER (L) SUB ASSY
→ VIDEO/MAIN UNIT SUB ASSY → DIGITAL CHASSIS SUB ASSY
→ MECHA ASSY
CY062
FFC Cable
Cord holder : Loose
Cord holder : Loose
cut
MECHA ASSY
Proceeding : TOP COVER → SIDE COVER (R) SUB ASSY → MIX AUDIO UNIT
ً
Direction of photograph: A
Board to board
Direction of photograph: C