Denon DVD-A1UDCI

18
DVD-A1UDCI
3. Tray lock mode
3.1. Preparation
(1) Equipment used: None
(2) Unit setting: No spec other than the following procedure.
3.2. Procedure
【Setting】
(1) Pressing the 1 and 3 buttons for simultaneously, plug the AC cord into a power outlet.
(2) "TRAY LOCK" is displayed on the fluorescent tube.
【Cancel】
(1) Unplug the DVD-A1UD's AC cord from the power outlet.
(2) Pressing the 1 and 3 buttons simultaneously, plug the AC cord into a power outlet.
(3) "PLEASE WAIT" is displayed on the fluorescent tube and tray opening/closing is enabled.
b The tray lock mode is also canceled when the product is initialized.
4. Remote lock mode s
4.1. Preparation
(1) Equipment used: None
(2) Unit setting: No spec other than the following procedure.
4.2. Procedure
【Setting】
(1) Pressing the PURE DIRECT 5 and SOURCE buttons for simultaneously.
(2) “Lock-On” is displayed on the FL tube, and operations with the remote control and the REMOTE CONTROL input ter-
minal on the back of the DVD-A1UDCI are disabled.
【Cancel】
(1) Pressing the PURE DIRECT 5 and SOURCE buttons for simultaneously.
(2) "Lock-Off" is displayed on the fluorescent tube and remote lock mode is made canceled.
5. All Lit / All Off mode for the FL tube s
5.1. Preparation
(1) Equipment used: None
(2) Unit setting: No spec other than the following procedure.
5.2. Procedure
【Setting】
(1) Pressing the Pure Direct and 1 buttons for simultaneously, plug the AC cord into a power outlet.
If All Lit / All Off mode is set for the FL tube, the FL tube’s display area is fully lit.
(2) Press the Pure Direct button to switch between ‘all lit’ and ‘all off’ display.
【Cancel】
(1) Remove the power cable for 5 seconds or more to cancel All Lit / All Off mode for the FL tube.