Denon DVD-A1UDCI - Page 16

16
DVD-A1UDCI
1.Iop checked Method
Select the laser ON/OFF(CD/DVD/BD)mode of the test mode, and check the IOP value of CD laser, DVD laser or BD
laser.
(See page 19 for test mode.)
DVDlasercurrentcheck
Press the 8 or 9 button to display the laser current value, and then select [X].
Check the current value of Iop (nnnn).
(X=1 : CD laser mode, 2 : DVD laser mode, 3 : BD(SL) laser mode, 4 : BD(DL) laser mode)
(nn.nn[mA] : Current value)
2. To clear the accumulated laser on time
Press the 1 button while the accumulated laser on time is displayed ("TC1, "TC2", "TC3" ) until " ＊ " appears at the fourth
position. Press the 8 or 9 button to select "TC4".If the 1 button is pressed while "TC1" is displayed, the accumu-
lated laser on time of CD, DVD and BD is cleared.
When “TC1”, “TC2” or “TC3” is selected with the 8 or 9 button, "mmmmmm" is displayed as “0” so you can check.
(Y=1 : CD, 2 : DVD , 3 : BD, mmmmmm : Time(Fractions of hours are counted up one hour on the display.)
FL Display (The display part of 13 digits)
12345678910111213
T2 LaserOnOff
FL Display (The display part of 13 digits)
12345678910111213
T2X-mmmm-nnnn
FL Display (The display part of 13 digits)
12345678910111213
TC4*---------
FL Display (The display part of 13 digits)
12345678910111213
TCY---mmmmmmh