T
Tyler MartinezJul 26, 2025
How to fix a Denon PMA-2500NE remote control that is not working?
- CCaleb DyerJul 26, 2025
If the Denon Amplifier remote control isn't working, first replace the batteries. If that doesn't solve the issue, make sure you're within 7 meters and 30 degrees of the unit, and that there are no obstacles blocking the signal. Also, check that the batteries are inserted correctly, observing the polarity markings. Strong light, like direct sunlight or certain fluorescent bulbs, can interfere with the remote sensor, so try moving the unit. Finally, if you're using a 3D video device, adjust the position and distance of other units to prevent interference with the Denon Amplifier's remote control.