Audio from digital devices cannot be played back (Coaxial/Optical)
“Unlocked” is displayed.
0
When digital audio signals cannot be detected properly, “Unlocked” is displayed. (v p. 37)
“Unsupported” is displayed.
0
“Unsupported” is displayed when audio signals that are not supported by this unit are input. Check the audio output signal format from your digital
device. (v p. 37)
The input source switches to “Optical 1”, “Optical 2”, “Optical 3” or “Coaxial”
The input source automatically switches to “Optical 1”, “Optical 2”, “Optical 3” or “Coaxial” when the TV connected to this unit is turned on.
0
Press the TV AUTO-PLAY button on the remote control unit to set the TV Auto Play function to “Off”. (v p. 39)
Contents
Connections Playback Settings Tips Appendix
49
Front panel Rear panel
Remote control
unit
Index
To Next Page
Loading...
