Denon POA-F100 - Back Chassis and AMP P.W.B. Removal; Main P.W.B. Detachment

mE POA-F 100
3 Back Chassis
(1) Take off the Cord Stopper from the Back Chassis.
(2) Remove 7 screws (3), and detach the Back Chassis to
the arrow direction.
Cord Stopper
Back Chassis
ea
AMP P.W.B.
(3) Remove 4 screws (4) fixing the Heat Sink Bracket L/R.
(4) Disconnect 5P and 8P Connector Cord from their connector
bases.
(5) Detach the Amp. P.W.B. with the Main Heat Sink.
MAIN P.W.B.
(6) Remove 2 screws (5), and detach the Main P.W.B.
Main P.W.B.