9
Operation
Basic Weighing Function
Preparation
§ Turn on the balance:
Press [ON/OFF]
§ To change configurations: See
the chapter entitled “Configuring
the Balance”
$ To tare the balance: Press [TARE]
Additional Functions:
§ To turn off the balance:
Press [ON/OFF]
Warmup Time
$ To ensure accurate results, the bal-
ance must warm up for 60 minutes
before operation. Only after this
time will the balance have reached
the required operating temperature.
Example
Basic weighing
Step Key (or instruction) Display/Printout
1. Turn on the balance [ON/OFF]
Self-test is performed
2. Place container on balance
+ 52.0 g
(here: 52 g)
3. Tare the balance [TARE]
+ 0.0 g
4. Place sample in container
+ 150.2 g
on balance (here: 150.2 g)
To Next Page