Denver CAT-730 - Setting Up the DVD Player; Settings; Setting Rating Password

EN13
SETTING UP THE DVD PLAYER
Youcanexiblycustomizetheunittosuityourpreference.Youcansetthelanguageandothervideoandaudio
settingssowhenplaybackstartsitwillalwaysuseyourpreferredsettings.
Important:
1.Loadanydiscintotheunitbeforeyoucanaccessthesetup.
2.PressSetup ontheremotecontrol.
3.Use( / )toreturn/entercategory.
Setting Rating Password
1 Press Setupontheremotecontrol.
2 UsingNavigationkeysselectSystem Setup > Password andpressEnter.
3 Enterthedefaultpassword‘0000’andpressEntertounlockrstandthenenternew4digitpasswordand
pressEnter.Theunlocklogowillswitchtolockindicatingpasswordhasbeenset.
Note:
- The default password is ‘0000’.
- In case you forgot your password, you can use the master password ‘0000’ to unlock and reset the
password.
- Master password will only work while SETUP button is press during playback.
Settings
SystemSetup
LanguageSetup
VideoSetup
Category
TVSystem
AutoPlay
TVType
Password
Rating
Default
OSDLanguage
AudioLanguage
SubtitleLanguage
MenuLanguage
MPEG4Language
Brightness
Contrast
Hue
Saturation
Sharpness
Options
NTSC,PAL,AUTO
ON,OFF
4:3PS,4:3LB,16:9
Setuppassword
Setupratinglevel
Restoretofactorysettings
Selectpreferredoptionsappearonscreen
Usenavigationkeysonremotecontroltosetup
desiredlevel.