13. TV System (compatible with DIVX, DVD, SVCD, VCD, CD, CD-G, DTS-CD,
HD-CD, WMA, MP3/JPEG discs)
Press P / N button on the remote control to display the current TV system.
Press the P / N button again to change to another TV system. There offers four systems:
NTSC, PAL60, PAL, and AUTO. With each consecutive press of the P / N button, the TV system
switches. If you press the button five times, the TV system cycles back to the default.
Notes:
If AUTO TV system selected, it can auto reach the highest definition depends
on the disc.
If it isn’t full screen state (note: Wide Screen program would never reach full
screen state) or in black and white, press the P / N button to adapt TV System
to the TV set of NTSC or PAL.
When playing in different TV system, some discs may not have their features
entirely fulfilled in some certain standard.
14. Mute Feature (compatible with DIVX, DVD, SVCD, VCD, CD, CD-G, DTS-CD,
HD-CD, WMA, MP3/JPEG discs)
Pressing the Mute button allows you to reduce sound to an inaudible level, and “MUTE” will
be displayed on screen. Press the button again or press the Vol +/- button to return to the normal
condition.
Notes:
When in the state of Mute, the microphone also has no audio output.
If the output is no sound, please try to press Mute button to resume.
15. Zoom In/Out the Video Image (compatible with DIVX, DVD, SVCD, VCD, JPEG
discs)
The Zoom Function allows you to enlarge or zoom out the video image and to pan though
the image. Press Zoom repeatedly to activate the function and choose the required zoom
factor: Zoom 2, Zoom 3, Zoom 4, Zoom 1/2, Zoom 1/3, Zoom 1/4, Zoom Off.
Notes:This feature does not work when the Disc Menu appears.
16. Repeat a Specific Segment (compatible with DIVX, DVD, SVCD, VCD, CD, CD-G,
DTS-CD, HD-CD, WMA, MP3 discs)
a) During the normal or fast motion playback, press the A-B RPT button once, and
“REPEAT A-” will appears on the screen. This indicates the start of the loop to be
repeated.
b) Press A-B RPT again, and “REPEAT A-B” will appear on the screen. It indicates the
end of the loop.
Looping will run from set point A to set point B until you turn off Repeat.
c) Press A-B again to cancel A-B loop mode.
When playing a SVCD, VCD, or CD disc, you can repeat a specific segment only
in one track. When the next track begins, A-B Repeat turns off automatically.
When playing a DIVX or DVD disc, you can repeat a specific segment only in one
title / chapter.
To Next Page
Loading...
