For the protection of the disc, before you press Open / Close button to eject the
disc tray when playing, please press Stop button at first. After taking out the
disc, press Open / Close again to close the tray.
If you’re not going to use the MPEG 4 DVD player for a long time, be sure to
remove the electronic plug.
b) Title Play (compatible with DIVX and DVD discs only)
I. During DIVX and DVD playback, press Title button to display the disc title
contents of the DIVX and DVD discs.
II. Press the Arrow buttons to highlight the title you want, and press Enter; Also you
can press numeric buttons to choose.
III. The MPEG 4 DVD player starts to play the chapter 1 from the chosen title.
c) Sequence Play (compatible with DIVX, DVD, SVCD, VCD, CD-G, DTS-CD,
HD-CD, WMA, MP3/JPEG discs)
I. When a SVCD or VCD disc is loaded and Menu Play is on, the player can play in
sequence playback mode.
II. Except for SVCD or VCD discs, in the stop state, when press Play button, the
player then enters sequence playback mode. This feature is effective to all the
compatible discs.
d) Program Play (compatible with DIVX, DVD, SVCD, VCD, CD, CD-G, DTS-CD,
HD-CD, WMA, MP3/JPEG discs)
The Program Playback option allows to enter your programmed chapters or tracks
which you want to play, maximum to 16.
Program Menu:
If Menu Play is on, this operation will turn to Menu Play off while the chapters
/ tracks plays in programmed order.
According to the highlight, use the Numeric buttons to enter the chapters / tracks in
the order you want them to play. Then press Play or use Arrow buttons to highlight
the “PLAY” item and press Enter. The chapters / tracks will play in the programmed
order.
You can program maximum 16 titles / chapters / tracks.
According to the Direction Indicator on the menu, you can press Arrow buttons to
highlight where you want to enter.
During Program Playback, if Program button is pressed, the programmed order and
the contents will be displayed on the screen, and Program Playback will be stopped;
Also you can press Stop and Play to resume normal playback.
Notes:
To clear the programmed order, use Arrow buttons to highlight the “CLEAR”
item, then press Enter.
To modify the programmed order, use Arrow buttons to highlight the modifying
item and enter the new chapter / track you want to program directly.
Meanwhile, the program indicator will be shown on the VFD illuminator, and so as
the playing chapter / track.
To Next Page
Loading...
