This document describes the DENVER TAQ-10172MK3 tablet PC, providing essential information for its operation, maintenance, and technical specifications.
Function Description
The DENVER TAQ-10172MK3 is a tablet PC designed for general use, including browsing the internet, running applications, managing emails, and multimedia consumption. It operates on Android™ 5.1 and features a capacitive touchscreen for intuitive interaction. The tablet supports wireless internet connectivity via Wi-Fi and allows for file transfers to and from a computer. It includes preinstalled applications for common tasks such as web browsing, calculations, photography, email, music playback, and system settings. Users can also install additional applications from various sources.
Important Technical Specifications
- RAM: 1GB DDR3
- Storage: 8GB flash built-in, with a microSD card slot supporting up to 32GB
- Display: 10.1-inch TFT LCD with a resolution of 1024x600 pixels, featuring a capacitive touchscreen
- Wi-Fi Networking: IEEE 802.11 b/g/n
- Audio Output: 3.5mm headphone jack
- PC Interface: USB 2.0 high-speed
- Additional Features: Built-in microphone, 0.3MP camera, 1W speaker, Quad Core 1.2GHz processor
- Operating System: Android™ 5.1
- Power: Rechargeable Li-poly battery with a capacity of 4400mAh, powered by a 5V, 2A adapter
Usage Features
Turning On/Off and Standby:
To turn on the tablet, press and hold the Power key until the LCD screen illuminates and the Home screen appears. To turn off, press and hold the Power key until the power off menu appears, then select "Power off." For standby mode, a single press of the Power key turns the screen off to conserve battery and another press turns it back on. The screen timeout can be adjusted in the Display menu (15 seconds to 30 minutes).
Unlocking the Screen:
When the screen is off, drag the lock icon across the screen towards the slide lock icon (typically an unlock icon) to unlock the device.
Applications:
Applications can be opened by tapping their icons on the home screen or within the Launcher. The tablet comes with preinstalled apps like Browser, Calculator, Camera, Email, Music, and Settings. Additional applications can be installed from the device's marketplace, web browser, or other sources, provided the "Unknown sources" option is enabled in Application settings.
Connecting to the Internet (Wi-Fi):
- Access Settings.
- Locate "Wi-Fi" under "Wireless & networks" and slide the toggle to the "On" position.
- Select an available network from the list. If prompted, enter the password for secured networks. A "Refresh" button is available to update the list. Networks can also be added manually.
- Once connected, the display will show "Connected" under the network name. To conserve battery, Wi-Fi should be turned off when not in use.
Email Setup:
- Tap the Email icon.
- Enter your email address and password, then tap "Next."
- If automatic setup fails, manual configuration is required. This involves specifying server type (POP3, IMAP, or Exchange), incoming server details, and outgoing server details. Wi-Fi must be active for the app to test settings.
Transferring Files:
To transfer files to a computer, connect the tablet using the included Mini-USB to USB cord. Once connected, the tablet will be recognized as a media device, allowing for file transfers.
Maintenance Features
Safety Information:
- ESD Test: Manual power ON/OFF may be required to resume normal operation after an electrostatic discharge test.
- Battery: The tablet contains a lithium battery. Do not attempt to open the tablet, expose it to heat, water, moisture, or direct sunlight. Only charge with the original adapter. Battery replacement should only be performed by a skilled engineer and must be recycled or disposed of separately from household waste. Do not incinerate the battery.
- Environmental: Do not expose the apparatus to rain or moisture. Avoid dripping or splashing liquids, and do not place liquid-filled objects on the apparatus.
- Power Adapter: The direct plug-in adapter serves as a disconnect device and must remain readily operable.
- Electrical Safety: This is a Class II, double-insulated appliance. Do not remove the cover; refer servicing to qualified personnel. The lightning flash symbol indicates dangerous voltage, and the exclamation point indicates important operating and maintenance instructions.
- Disposal: The product should not be disposed of with other household wastes. Recycle responsibly through designated collection systems to promote sustainable reuse of materials.
Troubleshooting:
- Wi-Fi Connection Issues: Ensure the network is working, the device is within range, and the security password is correct.
- Device Not Turning On: Charge the battery if it's low. Use a needle or paper clip to reset the unit. Check if the charger is connected correctly.
- Heat Issues: It's normal for the device to get warm during heavy use, bright screen settings, or charging.
- System Anomalies: If the system isn't working correctly, a third-party application might be the cause. Press the RESET button to perform a system reset.
- Email/Registration Issues: Ensure Wi-Fi is connected, email settings are correct, and system time is accurate.
- Recording Issues: Reset the unit with a needle or paper clip and check the record function.
- Short Stand-by Time: Battery life varies with temperature and usage (high volume, frequent Wi-Fi use). Use at normal temperatures.
- No Earphone Sound: Check volume settings. Verify if the audio file is corrupted by trying another file.
- Color Distortion: Reset the unit with a needle or paper clip.
- File Copy Issues: Ensure the device is correctly connected to the computer, memory space is not full, and the USB cable is functional.
- General Troubles: For other issues, try resetting the unit with a needle or paper clip. If problems persist, consider upgrading the firmware from a PC.
Factory Reset:
A factory reset on Android 5.1 units can take up to 10 minutes. During this process, the device will display "Android" while reloading firmware. It is crucial not to turn off the tablet during this state. The tablet will automatically restart once the firmware reload is complete.
Need help?
To Next Page
General
