Denver WRD-50 - Using the Device for the First Time; Mains Operation

2
1.2. Rear
13) Headphone jack
14) DC IN jack
15) Storage lock
16) AUX IN jack
NOTICE
The type plate is located on the underside of the machine.
2. Using the device for the first time
2.1. Mains operation
► Insert one end of the power cable plug into “DC IN” socket on the device.
► Insert the other end of the power cable into the 100-240V-50HZ wall outlet.
► Then the built-in battery of the device will be charged automatically. During charging, the display
shows the icon.