Denver WRD-50 - Technical Data

6
Save these settings and set the alarm on or off
When the alarm goes on, press the SNOOZE button to snooze. It will go off again nine minutes later,
Sleep
In power on mode, Press and hold the MENU/INFO button to enter the main menu. Then select one of the
following the sleep time options: Sleep OFF, 15 MINS, 30 MINS, 45 MINS or 60 MINS. When the sleep
function is turned on, the sleep time is displayed on the right side of the LCD display. Sleep function is
automatically turned off if the unit is put into standby.
Backlight
Backlight brightness and time can be set in the main menu
Power on:
Time out: 10, 20, 30, 45, 60, 90, 120, 180, ON
ON Level: High, medium, low
Standby mode:
Dimmer time: 10, 20, 30, 45, 60, 90, 120, 180, ON
Dimmer Level: High, medium, low, off
Factory Reset
Reset all user settings to factory default values. After resetting, time/date and radio presets will be erased.
To perform a factory resetting, select System > Factory reset > Yes.
Language
The default language is Germany. To change language, select System > Language, then select a
language.
Info
Show the following system information: SW Version (Software version number)/Radio ID (Unique code
used to identify this radio device).
6. Disposal
Packaging
The product has been packaged to protect it from damage in transit. Packaging materials
are raw materials and can therefore be reused or recycled.
7. Technical data
Product
Input:
AC 100–240 V ~ 50 Hz