A WARNING
ELECTRIC SHOCK can kill.
Ш
Do not touch the output terminals during operation
to prevent decease due to electric shock.
* Never touch the output terminals during operation.
If your hands or the machine are wet, it will result
in a death or serious injury.
* When a wiring work is required, be sure to turn OFF
the circuit breaker and stop the machine, .
* Keep the output terminal cover closed and the terminal
bolts tightened while the machine is running.
* A low voltage is generated even when the machine is
in low speed idle operation.
Be sure to stop the machine completely.
S Do not touch the electrical parts in the machine during operation, as it may
lead to death due to electric shock.
* Always close the control panel and tighten the fixing bolts before operating the
machine.
* Always close the side door and lock it before operating the machine,
* When opening the control panel for voltage selection, etc., turn OFF the circuit
breaker and stop the machine.
To Next Page
Loading...
