4-2 Connecting the load
ELECTRIC SHOCK can kill.
I Do not touch the output terminals during operation
to prevent decease due to electric shock,
* When a wiring work is required, be sure to turn OFF
the circuit breaker and stop the machine.
* When operating the engine, close the output terminal cover.
Tighten the fixing bolts before operating the machine.
Ш Do not use damaged cables to prevent electric shock.
Insufficient tightening of bolts will generate b
connections which may result in fire accidents.
* When connecting, make sure the connecting cable
normal and connected firmly to the output terminals.
Ж
t o
are
A
CAUTION
Connection to house wiring
H Before connecting this machine to any building’s electrical system, a licensed
electrician must install an isolation(transfer) switch.
* Serious injury or death may result without this transfer switch.
- 28 -
To Next Page
Loading...
