1. Please connect the product to your computer.
2. Press the MENU button to enter the menu.
3. Select “Data transmission”.
4. Press the button to start copying to computer.
Copy photo and video files to computer
07
Guide for accessories installation
Installation method:
Turn counterclockwise-remove
protect cap
Turn clockwise-tighten
accessories
Charging Instructions
1. Use a TF card reader to copy data directly.
1. Connect the device to the DC 5V adapter for charging;
2. The red indicator light flashes when the device is charging, and is
always on when fully charged.
If the device is not connected with computer, click "Data transmission"
on the setup interface, then USB icon shows up on the display; Please
press the MENU button to exit.
It is normal for "No Signal" to appear on the screen when you press
the MENU button to exit data transmission.
2. Use a Micro USB cable to connect to computer for copying
Setting path.
Card Reader
TF
Card
To Next Page
Loading...
