To Next PageTo Next Page
Need help?Do you have a question about the DEREE DE-5000 and is the answer not in the manual?
Defines impedance as real and imaginary parts, including magnitude and phase angle.
Explains measurement in series or parallel modes, defining impedance and admittance.
Process to improve accuracy by reducing test fixture parasitic effects.
Illustrates the circuit models for DUT, open, and short conditions.
Describes the various symbols and indicators shown on the LCR meter's LCD screen.
Instructions on how to turn the LCR meter on and off, including auto power off behavior.
Guides users through the internal parameter and connector residue calibration process.
Explains the automatic selection of LCR, L, C, R, and DCR measurement modes.
Details how to measure L, C, and R components using various connection methods.
Describes how to select the test frequency from 100Hz to 100kHz.
How to turn the LCD backlight on and off, and its auto-off feature.
Explains the setup for component sorting, including reference value and tolerance setting.
Instructions for transferring measurement data to a PC via USB interface.
How to select secondary parameters like Dissipation, Quality, ESR, or Phase Angle.
How to manually select series or parallel measurement modes.
Instructions for entering and using the relative measurement mode.
How to freeze the current measurement reading on the display.
General| Brand | DEREE |
|---|---|
| Model | DE-5000 |
| Category | Test Equipment |
| Language | English |
