OPERATION
Setting the Airflow Direction (Swing)
The louvers on certain units can oscillate in three ways; Standard, Swing, Fixed
These can be selected by pressing the ‘Swing’ button
1. Standard
The louvers will move up and down through 120
o
and then stay open for 1
minute before repeating the process
2. Swing
The louvers will continuously move up and down through 120
o
3. Fixed
The louvers remain fixed in the direction set
Setting the Vertical Airflow Direction
The vertical louvers can be adjusted manually to the desired position
WARNING
• Never move the horizontal louvers manually
• During cooling/de-humidifying functions, the horizontal louvers
should not face downwards for a long time, nor should the vertical
louvers be fully turned to the right/left
To Next Page
Loading...
