To Next PageTo Next Page
Need help?Do you have a question about the Desmi S80-70-175N/A-D11 and is the answer not in the manual?
General| Pump Model | S80-70-175N/A-D11 |
|---|---|
| Inlet/Outlet | 80 mm / 70 mm |
| Impeller Diameter | 175 mm |
| Connection Type | Flanged |
| Material | Cast Iron |
| Seal Type | Mechanical seal |
Check on delivery that the shipment is complete and undamaged. Report defects and damages to the carrier and supplier.
Details on the pump's name plate, including manufacturer, contact information, and type designation.
Breakdown of the pump's type number, explaining its components and their meaning.
Information on pump noise level, capacity, and permissible flange loads.
Guidance on mounting and fastening the pump on a solid base plate to avoid distortion.
Wiring must be carried out by authorized skilled workmen according to regulations.
Steps to access the impeller by removing specific parts like U-pipe and shaft seal cover.
Instructions for removing the impeller, priming plate, and star wheel.
Procedure for dismantling the shaft seal, including removing the sunk key and shaft seal cover.
Instructions for fitting the sealing ring against the pump casing shoulder.
How to lead the shaft with bearings into the housing and fit the sunk key.
Assembling the bearing housing and shaft seal cover with the water deflector.
Detailed steps for fitting the shaft seal, including cleaning, lubrication, and using a fitting bush.
Check shaft rotation and pump casing filling before starting; check rotation direction.
What information to provide when ordering spare parts, like pump type and number.
