Desmi SA-25-122 User Manual

__________________________________________________________________________________
DESMI Pumping Technology A/S
Tagholm 1
9400 Nørresundby – Denmark
Tel: +45 96 32 81 11 Fax: +45 98 17 54 99
E-mail: desmi@desmi.com
www.desmi.com
OPERATION AND MAINTENANCE INSTRUCTIONS
DESMI self-priming centrifugal pump
TYPE SA
Monobloc design
DESMI Pumping Technology A/S
Tagholm 1 – DK-9400 Nørresundby – Denmark
Tel.:
+45 96 32 81 11
Fax:
+45 98 17 54 99
E-mail:
desmi@desmi.com
Internet:
www.desmi.com
Manual:
T1517
Language:
English
Revision:
E (11/20)
Special pump nr. .................

Desmi SA-25-122 Specifications

General

Brand	Desmi
Model	SA-25-122
Category	Water Pump
Language	English

Summary

Product Description

Delivery

Check on receipt that the delivery is complete and undamaged.

Technical Data

Explanation of the Type Number

Explains the build-up of the type number on the name plate.

Technical Description

Details noise level, pump capacity indication, and relief valve.

Installation

Mounting/Fastening

Guidance on mounting the pump, shaft orientation, and pipe systems.

Wiring

Specifies wiring should be done by authorized skilled workmen.

Transport and Storage

Inspecting the Pump

Inspection

Checks for wear and damage on specific pump parts.

Fitting Shaft Seal

Detailed steps for fitting the shaft seal, including lubrication and checks.

Shaft

Check that the shaft rotates freely after assembly.

Frost Protection

Dismantling

Start-Up

Starting

Steps for starting the pump, including checking rotation direction.

System Balancing

Inspection and Maintenance

Draining the Pump

Procedure to drain remaining liquid after system drainage.

Bearings

Information on ball bearings, lubrication, and replacement.

Repairs - Ordering Spare Parts

Operating Data

EU Declaration of Conformity

Information Relevant for Disassembly or Disposal at End-of-Life