To Next PageTo Next Page
Need help?Do you have a question about the Desmi SA Series and is the answer not in the manual?
General| Type | Self-priming centrifugal pump |
|---|---|
| Self-priming | Yes |
| Material | Cast iron, bronze, stainless steel |
| Impeller | Semi-open or closed impeller |
| Applications | Marine, industrial, fire fighting, marine applications |
| Max Pressure | 16 bar |
Details on checking the completeness and condition of the delivered pump upon arrival.
Breakdown of the pump's model designation, explaining each component of the type number.
Description of technical aspects including noise levels, relief valve, and flange load limits.
Guidance on pump mounting, flange load considerations, and piping arrangements.
Instructions for electrical wiring, emphasizing skilled personnel and regulations.
Procedure for inspecting pump components like wear plate, impeller, and seals for wear.
Step-by-step instructions for correctly fitting a mechanical shaft seal to the pump.
Instructions for checking the pump shaft rotation after assembly to ensure it turns freely.
Steps before starting the pump, including checks and confirming rotation direction.
Method for completely draining the pump of liquid before maintenance or storage.
Information on the pump's ball bearings, their lubrication, and replacement criteria.
