What to do if the door of my Despatch Oven will not stay closed?
If the door of your Despatch Oven won't stay closed, it's likely due to inadequate latch tension. Ensure the latch strike is contacting the center of the latch. Adjust the mounting angle to center as required. Increase latch tension by turning screws on the end of the latch clockwise. Adjust in even increments on all four screws to keep door pull even.
Why is my Despatch Oven making a grinding noise?
A grinding noise in a Despatch Oven suggests the fan wheel has shifted or fallen. Inspect the wheel and reposition it within 0.25” from the top of the housing.
What to do if the door of my Despatch Oven closes into top or bottom latch only?
If the door of your Despatch Oven closes into only the top or bottom latch, it's likely due to uneven latch tension adjustment. Ensure that the latch strike is contacting the center of the latch. Adjust mounting angle as required. Adjust door for even top and bottom latch tension by turning screws on ends of latch. Clockwise increases tension on latch. Counterclockwise decreases tension.
Specifies temperature performance, uniformity, and control stability.
Crucial warnings and guidelines for safe operation and maintenance.
Procedures and requirements for safely de-energizing equipment.
Emphasizes safety when working with electrical power sources.
Procedures to follow in case of a fire incident.
Reinforces lockout procedures to prevent injury during service.
Overview of the oven's primary and secondary control systems.
Describes the microprocessor-based digital temperature controller.
Explains the function and setting of the High Limit instrument.
Setting the High Limit for product protection against over-temperature.
Setting the High Limit for oven protection against over-temperature.
Steps for setting up the oven and selecting its operating environment.
Instructions for connecting the oven to the electrical supply.
Step-by-step guide for operating the oven using the standard controller.
Detailed procedure for powering on and starting the oven.
Procedure for adjusting the oven's setpoint temperature.
Procedures for setting and configuring the High Limit instrument.
Step-by-step guide for replacing the oven's control instrument.
Detailed instructions for replacing the High Limit instrument.
Step-by-step guide for replacing the oven's heater unit.
Detailed instructions for replacing the oven's fan motor.
To Next Page
General