- 17 -
This chart explains the procedure for activating devices that require an Access Control PIN.
Your system may use a keypad key sequence to activate other electrical devices.
The special PIN required to perform this function is known as an Access Control PIN.
This feature can be used in armed or disarmed modes.
Access PIN activations are recorded at the History Buffer.
The PIN may control devices that activate for a short period of time (i.e. electric locking mechanisms on a door).
This feature must be disabled on U.L. Listed systems.
The control is not a listed access control unit (UL294).
Access Control
[Access Control PIN] + [Off]
Momentary Access
Control Panel
Activation
The Access device will be activated for 10 seconds
To Next Page
Loading...
