Using the OpenPhone IPC with an Interface Operation
16
5.2 Operation
The OpenPhone IPC can be used with a mouse or keyboard of any workstation
computer, in a manner similar to an OpenPhone 71, OpenPhone 73 or
OpenPhone 75.
When making entries via the keyboard, please note the terminal’s input mode,
which distinguishes between numeric and alphanumeric input. If, for example,
you enter a call number you are in numeric input mode. When you search for a
name in the telephone book, you will be in alphanumeric input mode. To enter a
“C” on the terminal, for example, you have to press the “2” key three times. When
the letter “C” is entered on the keyboard, the OpenPhone IPC automatically con-
verts it to the corresponding digit key. Always use your workstation computer’s
number pad to enter digits in numeric input mode.
Press the shift key on the workstation computer together with a second key to
enter a long key-press on the OpenPhone IPC. For example, the OpenPhone IPC’s
ABC key has the telephone book (“short”) and language selection (“long”) func-
tions. You can open the telephone book by using the Ctrl+A key combination.
With the key combination Shift+Ctrl+A you reach the language selection.
The following table describes the assignment of the workstation computer’s key-
board to the OpenPhone IPC keys:
Ctrl Shift PC Key(s) (Alpha)
numeric
Phone Key(s) Comment
0-9 Numeric
0 - 9 Digit input
*Numeric
* Digit input
/Numeric
# Digit input
0-9 Alphanu-
meric
0 - 9 Digit input
abc… Alphanu-
meric
2
a
->
b
->
c
…
Text input
abc… Alphanu-
meric
2(long)
A
->
B
->
C
…
Text input /
Toggle be-
tween upper
and lower case
✔ ✔
✔
To Next Page
Loading...
