Detroit Diesel Series 60 Service Manual

NUMBER: 11–60–02 S.M. REF.: 1.23 ENGINE: 60 DATE: December 2002
SUBJECT: COMPACT GEAR TRAIN ASSEMBLY
INTRODUCTION
Detroit Diesel has released a new Compact Gear Train Assembly for the Series 60 2002 engine. This
new assembly offers weight savings, noise reduction and height reduction. The bullgear is a straight cut
gear that now rides on bushings.
DETAILS AND REASON
Series 60 2002 Engines are equipped with a new Compact Gear Train A ssembly. Camshaft, Camshaft
Drive Gear and Camshaft Gear Cover will be installed and removed as a assembly.
For engines equipped with a Compact Gear Train Assembly remove camshaft assembly as follows.
1. RotatetheenginebyhandtogettheNo.1pistonatTDC.Dothisbyinstallingthecrankshaft
timing pin J 45947 into its bracket and the barring engine over by hand until the timing pin
drops into the locating hole in the crankshaft, the engine is now at TDC on cylinder No.1.
SeeFigure1.

Detroit Diesel Series 60 Specifications

General

Cooling System	Liquid-cooled
Configuration	Inline-6
Bore	130 mm (5.12 in)
Stroke	160 mm (6.30 in)
Fuel System	Electronic Unit Injector (EUI)
Turbocharger	Yes
Aspiration	Turbocharged
Torque	1, 250-1, 650 lb-ft (1, 695-2, 237 Nm)
Engine Type	Diesel