DEVI DEVIreg 130 - Introduction

Table of Contents
1 Introduction ............... 3
1.1 Technical Specifications ..... 4
1.2 Safety Instructions ........ 5
2 Mounting Instructions ......... 6
3 Settings ................. 10
3.1 Temperature Settings ...... 10
4 Warranty ................. 12
5 Disposal Instruction .......... 12
1 Introduction
DEVIreg™ 130 is an electronic thermostat to be installed di-
rectly on the wall. It is provided with a floor sensor to meas-
ure and control the desired floor temperature.
The thermostat has a button for adjusting the temperature
setting with a scale from ( ) 1 to 5 (each step corresponds
to approximately 9°C). Furthermore, the thermostat has an
LED indicator showing standby periods (green light) and
heating periods (red light).
More information on this product can also be found at:
devireg.devi.com
DEVIreg™ 130
Installation Guide 3