▪
The sensor is to be considered as live voltage. Have
this in mind if the sensor must be extended.
▪
Always connect the thermostat to continuous power
supply.
▪
Do not expose the thermostat to moisture, water, dust,
and excessive heat.
2 Mounting Instructions
Please observe the following placement guidelines:
Place the thermostat at a suitable height on
the wall (typically 80-170cm.).
In wet rooms, place the thermostat according
to local regulation on IP classes.
Do not place the thermostat on the inner side
of an exterior wall.
DEVIreg™ 130
6 Installation Guide
To Next Page
Loading...
