Devialet Phantom - Set Up Phantom via Wi-Fi

INTRODUCTIONPHANTOM WITH DIALOG
11
PHANTOM WITHOUT DIALOGSPARK
START PHANTOM
INSTALL SPARK
You now need to download SPARK on our
website www.devialet.com/spark (from your
computer, smartphone or tablet).
Open SPARK, touch START to launch
the setup.
Accept the Terms & Conditions by touching
I AGREE.
You are not using DIALOG, touch
NOT YET.
You need to leave the application
without closing it. Go to your device
Wi-Fi’s settings.
Connect to the Wi-Fi network
 PHANTOMSETUPFollowed by a
sequence of numbers and letters 
6
7
8
9
10
11
SETUP PHANTOM IN WIFI
Before you start your PHANTOM setup ,make sure your device (computer, smartphone, tablet) is connected to your home internet Wi-Fi network.
You will also need your internet network password , make sure you have it on hand - It is usually found under your router or Wi-Fi broadband.
steps 10-11 on windows
steps 10-11 on IOS and Android
steps 10-11 on mac
1/3
Unbox Phantom
Place your hands under the PHANTOM,
lift it from its base and place it on a
stable surface*.
Connect your PHANTOM to a power
outlet using the yellow power cable.
If you want to use PHANTOM with your TV
or CD/DVD/Blu-Ray player, you will need to
connect your TV or player to PHANTOM or
DIALOG, before you connect the yellow power
cord. To connect them you will need to use a
TOSLINK optical cable (cf see «TOSLINK digital
audio output»).
Wait 15 secondes. A subtil breathing sound
signals PHANTOM start-up.
CONGRATULATIONS!
PHANTOM is now ON.
1
2
3
+
4
5
* Please do not put your PHANTOM on waxed wood.