DeVilbiss 4262420130033

Questions and Answers

K
Kathryn PatelAug 20, 2025
What to do if the red service required light is on for DeVilbiss 4262420130033 Medical Equipment?
- S
  Stephen RiveraAug 20, 2025
  If the DeVilbiss Medical Equipment shows a red 'Service Required' light accompanied by an intermittent audible signal, first, ensure the flow meter is correctly set to the prescribed number. Then, check the air filter and clean it if it's dirty, following the cleaning instructions. Finally, inspect the exhaust area to ensure nothing is blocking the unit's exhaust.
K
kimberlychambersAug 22, 2025
Why is the yellow low oxygen light on for DeVilbiss 4262420130033 Medical Equipment?
- J
  jenniferleeAug 22, 2025
  If your DeVilbiss Medical Equipment displays a yellow 'Low Oxygen' light, possibly accompanied by an intermittent audible signal, start by verifying that the flow meter is accurately set to the prescribed level. Next, examine the air filter and clean it according to the provided cleaning instructions if it appears dirty. Lastly, inspect the exhaust area to confirm that nothing is obstructing the unit's exhaust.
M
michelleeatonAug 25, 2025
What to do if DeVilbiss 4262420130033 unit does not operate?
- C
  Carlos MillerAug 25, 2025
  If the DeVilbiss Medical Equipment unit isn't operating, all lights are off, and an audible alert is pulsing, first ensure the power cord is properly inserted into the wall outlet. For 230-volt units, check the mains connection on the back. If it still doesn't work, check your home circuit breaker and reset it if needed. If problems persist, try a different wall outlet. Also, check the oxygen concentrator circuit breaker and reset it if necessary by pressing the reset button located below the power switch. If these steps don't resolve the issue, contact your DeVilbiss provider.
K
khintonAug 26, 2025
What to do if red service required light is on DeVilbiss Medical Equipment?
- K
  Katie VincentAug 26, 2025
  If the red Service Required light is illuminated on your DeVilbiss Medical Equipment and an audible alert is sounding, check the following: * **Air filter:** If it's dirty, clean it according to the instructions. * **Exhaust area:** Ensure nothing is blocking the unit's exhaust. * **Cannula, mask, or tubing:** Detach these to see if proper flow returns. If it does, clean or replace the blocked component. * **Humidifier bottle:** Detach to check if flow improves; clean or replace if needed. * **Flow meter:** Ensure it's set to the prescribed rate. If issues persist, contact your DeVilbiss provider.
M
mcdowellsherryAug 28, 2025
Why is the yellow low oxygen light on DeVilbiss 4262420130033?
- J
  Jesse LawrenceAug 28, 2025
  If the yellow Low Oxygen light is on your DeVilbiss Medical Equipment, allow the unit up to 15 minutes to complete its start-up period.
J
joshuamanningAug 30, 2025
What to do if yellow low oxygen light is on and intermittent audible signal is sounding on DeVilbiss 4262420130033 Medical Equipment?
- K
  Kristy JohnsonAug 30, 2025
  If the yellow Low Oxygen light is on and an intermittent audible signal is sounding on your DeVilbiss Medical Equipment, make sure the flow meter is properly set to the prescribed number. Note that the maximum flow meter setting is 3 LPM when filling an oxygen bottle from the auxiliary port. Also, check the air filter and clean it if it's dirty. Finally, check the exhaust area to ensure nothing is blocking the unit's exhaust. If these steps don't resolve the issue, contact your DeVilbiss provider.
A
Alexander BeckerSep 1, 2025
What to do if red service required light is on and intermittent audible signal is sounding on DeVilbiss 4262420130033 Medical Equipment?
- E
  edwardmcphersonSep 1, 2025
  If the red Service Required light is on and an intermittent audible signal is sounding on your DeVilbiss Medical Equipment, ensure the flow meter is properly set to the prescribed number, noting that the maximum flow meter setting is 3 LPM when filling an oxygen bottle from the auxiliary port. Check the air filter and clean it if needed. Also, check the exhaust area to ensure it's not blocked. If these steps don't resolve the issue, or if you suspect an Electronic Assembly Malfunction, turn the unit off, switch to your reserve oxygen system, and contact your DeVilbiss provider immediately.
L
Lauren Wise MDSep 3, 2025
What to do if DeVilbiss 4262420130033 Medical Equipment makes audible low-frequency vibration sound?
- J
  Jeffrey GuerraSep 3, 2025
  If you detect an audible low-frequency vibration sound from your DeVilbiss Medical Equipment, turn the unit off, switch to your reserve oxygen system, and contact your DeVilbiss provider immediately, as this may indicate an Electronic Assembly Malfunction.
J
Joshua StokesSep 5, 2025
What to do if any other problems occur with DeVilbiss oxygen concentrator?
- B
  Betty MunozSep 5, 2025
  Turn your unit “Off.” Switch to your reserve oxygen system and contact your DeVilbiss provider immediately.
T
Tiffany MatthewsSep 7, 2025
What to do if the red Service Required light is on with an intermittent audible signal on my DeVilbiss Health Care Products?
- S
  Stephanie CarrSep 7, 2025
  If the red Service Required light is on and an intermittent audible signal is sounding on your DeVilbiss Health Care Products unit, it could be due to several reasons. First, ensure the flow meter is properly set to the prescribed number. Also, check the air filter; if it's dirty, wash it. Finally, inspect the exhaust area to make sure there is nothing restricting the unit's exhaust. If the issue continues after these checks, contact your DeVilbiss provider.