Why is fluid dripping from the bottom of my DeVilbiss GTI PRO LITE's cup?
If fluid is dripping or leaking from the bottom of the cup on your DeVilbiss Paint Sprayer, it's likely that the cup is loose on the gun or the cup fluid inlet seat is dirty. Tighten the cup and clean the cup fluid inlet seat.
General| Air Inlet Pressure | 2.0 bar (29 psi) |
|---|---|
| Gun Body Material | Anodized Aluminum |
| Type | Gravity Feed |
| Air Inlet Thread | 1/4" Universal |
| Recommended Pressure | 2.0 bar (29 psi) |
| Fluid Adjustment | Yes |
| Pattern Adjustment | Yes |
| Weight | 446 g |
| Fluid Tip Sizes | 1.2 mm, 1.3 mm, 1.4 mm |
Warnings and precautions related to flammable materials and static electricity.
Recommendations for protective gear such as eye, ear, and respiratory protection.
Instructions on improper usage and potential hazards.
Step-by-step guide for servicing the air valve assembly of the spray gun.
Procedure for replacing the needle packing and related components.
Instructions for replacing or maintaining the spreader valve assembly.
Detailed steps for replacing the spray head seal.
To Next Page