SQUEAKS ‘N’ CREAKS | D E V I N C I T E C H
DEVINCI TECH | SQUEAKS ’N’ CREAKS
WHEEL ASSEMBLY
MISC ASSEMBLY
1
2
3
QUICK-RELEASE
SKEWERS
REAR WHEEL
THREADED A XLES
WATER BOTTLE CAGES
WHEEL QUICK RELEASES SHOULD ALWAYS BE UNDER PROPER TENSION AND PROPERLY FASTENED. THERE SHOULD BE AMPLE RESISTANCE
WHEN TRYING TO OPEN THE QUICK RELEASE, IF NOT, TURN THE BOLT UNTIL A SIGNIFICANT AMOUNT OF FORCE IS REQUIRED TO CLOSE THE
QUICK RELEASE. MAKE SURE TO CHECK THE TENSION ON EACH QUICK RELE ASE BEFORE AND AFTER EVERY BIKE RIDE.
MAKE SURE TO LUBRICATE/GREASE THE REAR A XLE AND ITS THREADS BEFORE TENSIONNING IT TO ITS PROPER TORQUE. FAILURE TO
PERFORM THESE ACTI
ONS WILL RESULT IN EITHER A LOOSE AXLE, SEIZED AXLE AND/OR CREAKING NOISES WHEN PEDALLING FORCES ARE
APPLIED.
AS SIMPLE AS THEY ARE, WATER BOTTLE CAGES WHEN NOT TIGHTENED PROPERLY CAN GENERATE RAT TLING NOISES. REFER TO THE
MANUFACTURER’S OWNER MANUAL FOR PROPER INSTALLATION AND TORQUES.
3
2 1
To Next Page
Loading...