5.2.2 CONTINUOUS DRAINAGE
For continuous operation or unattended dehumidification, please connect the
water hose to the machine for continuous drainage. Condensate
water can be automatically flow into a bucket or drain by gravity.
Set the unit in a horizontal surface and stable position.
Switch off the unit before operating.Take out the water tank.
Securely and properly connect the drain hose and make sure it is not
kinked and clear of obstruction.
Place the outlet of hose over a drain or bucket and ensure that water could
freely flow out of the machine.
Do not submerge the end of hose into water; otherwise it can cause "Air Lock"
in the hose,which may result to water leakage
To avoid water spillage:
• As the negative pressure of condensate drain pan is large, tilt the drain
hose downward toward the floor. It is appropriate that the degree of
inclination should exceed 20 degrees.
Straighten the hose to avoid a trap existing in the hose.
To Next Page
Loading...
