21 Security in the dLAN
devolo dLAN 200 AVmini
dLAN devices in your network in order to form a closed
dLAN network.
You will need the 16-character Security IDs of the va-
rious adapters from the label on the housing. Enter the
code without hyphens in the 4 text boxes and confirm
by clicking Define password. If a security ID is correct
and the device is reachable in the dLAN, the device is
added to the list of already configured adapters.
When launching the dLAN Configuration Wizard again
after a successful initial installation—when integra-
ting a new adapter into the network, for example—
the application will remember devices and security
IDs entered in previous sessions if you have encryp-
ted them with a personal network password or the
default password. In this case, you do not need to
enter the devices again.
However, if the random password was used to encrypt
the network during the last installation, if you want to
fig. 8
To Next Page
Loading...
