Network configuration 45
devolo dLAN 500 AV Wireless+
If you would like, you can completely shut off the
WLAN part of your dLAN 500 AV Wireless+, e.g. if you
want to operate it exclusively as a simple dLAN device
via the built-in Ethernet connections. There are three
different methods for switching the WLAN function on
and off:
쎲 Simply press the ON/OFF button on the front
panel of the device.
쎲 Use the Enable WLAN or Disable WLAN button
on the configuration interface under WLAN con-
figuration.
쎲 Enable the WLAN time control. For more informa-
tion, refer to Chapter 5.5.5 WLAN time con-
trol.
The operating state of the device is displayed
under 5.3 Status overview.
To Next Page
Loading...
