46 Network configuration
devolo dLAN 500 AV Wireless+
5.5.1 Access point
Since the dLAN 500 AV Wireless+ acts as an access
point, you have to configure various parameters for
your wireless network.
Keep in mind that after saving this set-
ting, you will be disconnected from any
existing wireless connection to the
dLAN 500 AV Wireless+. In this case,
configure the device via Ethernet or
dLAN.
Settings
When activating the encryption, make sure that the
WLAN settings (SSID, encryption mode and encryption
key) of the access point always correspond to the set-
tings of the clients, as otherwise you will be (uninten-
tionally) excluding devices from your network.
To Next Page
Loading...
