Devolo Giga Bridge - Reading the Indicator Light

Introduction 18
devolo Giga Bridge
2.4.1Reading the indicator light
The integrated LED indicates the status of the
devolo Giga Bridge with flashing and lighting be-
haviour:
G.hn
LED
Flashing behav-
iour
Meaning LED status display
(web interface*)
1 Red LED Lights up for up to
5 seconds.
Start-up process Cannot be disabled
2 Red LED Flashes at inter-
vals of
0.5 seconds. (On/
off)
Status 1:
The adapter reset was successful. The
reset button has been pressed and held
for 10 seconds.
Status 2:
The adapter is (back) in factory default
condition. Since the last reset, no pairing
with another devolo Giga Bridge adapt-
er has taken place.
Connect the adapter to a different
devolo Giga Bridge adapter as a full-
fledged G.hn network, as described in
Chapter 3.3 Pairing – Establishing a
G.hn connection.
Cannot be disabled