Devolo Giga Bridge - Page 19

19 Introduction
devolo Giga Bridge
3Red LEDLights up steady Status 1:
The other network nodes are in standby
mode and cannot currently be accessed
over the mains supply. The LEDs of the
other devolo Giga Bridge adapters flash
white only for a short time.
Status 2:
The connection to the other network
nodes has been interrupted. The remote
station may have been removed or
there is a malfunction in the connection.
Can be disabled
4White
LED
Status 1:
Flashes at inter-
vals of 0.5 second
(On/off)
Status 2:
Flashes at inter-
vals of 1second
(on/off)
Status 1:
This devolo Giga Bridge adapter is in
pairing mode and the system is search-
ing for new devolo Giga Bridge adapt-
ers.
Status 2:
Someone triggered the "Identify device"
function on the web interface. This func-
tion identifies the devolo Giga Bridge
adapter being sought.
Cannot be disabled
G.hn
LED
Flashing behav-
iour
Meaning LED status display
(web interface*)