Devolo MicroLlink - Page 58

AT commands: Detailed description
|
|
devolo MicroLink ISDN i
|
58
EN
052/218 Rejected or disconnected by
remote terminal unit
Dial again later or check with remote
station.
052/240 Local procedure error (protocol
fault)
Dial again.
052/241 Remote procedure error (proto-
col fault)
Dial again.
Error codes S154/S155 Description
ISDN error messages (valid for DSS1 protocol)
053/001 Dial number is not assigned
053/002 No path to the requested transfer network
053/003 No path available to destination
053/006 Channel not accepted
053/016 Normal call trigger
053/017 Remote station busy
053/018 No response from remote station
053/019 Remote station does not answer
053/021 Call rejected
053/022 Dial number has changed
053/027 Remote station not operational
053/028 Incorrect number
053/029 Service feature rejected
053/034 No channel available
053/038 ISDN network not operational
053/041 Temporary fault
053/042 ISDN network overloaded
053/044 Channel or service not available
053/047 Service not available
053/049 Service not available
053/050 Requested service not ordered
053/057 Service feature not permitted
053/058 Service feature not available
Error
codes
S154/S155
Description Cause and possible correction