|
Appendix
63
|
devolo MicroLink ISDN i
|
EN
*The device can be supplied with direct current (DC). If power is put into the socket a potential difference of
0.7V between the DC source ground and the interface ground occurs (due to the rectifier diode). If these
grounds are connected galvanically the electric current flows back via the interface ground—following the
lowest resistance. Normally, this does not cause problems.
Security Integrated watchdog
Environment Temperature: 0..55°C, humidity 0..80%,
non-condensing
Operating systems Windows 98, Windows Me, Windows NT 4.0, Win-
dows 2000, Windows XP
CE conformity CE-compliant in accordance with R&TTE technical
requirements for all EU countries and Switzerland
Tested in accordance with EN 55024, EN 55022, EN
60950, CTR3 A1
MicroLink ISDN i
To Next Page
Loading...
