DeWalt D28493 - Ec Declaration of Conformity; Safety Instructions

22
ENGLISH
Director Engineering and Product Development
Horst Großmann
D E WALT, Richard-Klinger-Straße 11
D-65510, Idstein, Germany
Safety instructions
When using power tools, always observe the
safety regulations applicable in your country to
reduce the risk of fi re, electric shock and
personal injury.
Read all of this manual carefully before
operating the tool.
Save this manual for future reference.
General
1 Keep work area clean
Cluttered areas and benches can cause
accidents.
2 Consider work area environment
Do not expose the tool to rain. Do not use the
tool in damp or wet conditions. Keep the work
area well lit (250 - 300 Lux). Do not use the tool
where there is a risk of causing fi re or
explosion, e.g. in the presence of fl ammable
liquids and gases.
3 Keep children away
Do not allow children, visitors or animals to
come near the work area or to touch the tool or
the mains cable.
4 Dress properly
Do not wear loose clothing or jewellery,
as these can be caught in moving parts.
Wear protective hair covering to keep long hair
out of the way.
EC-Declaration of conformity
%
D28490/D28491/D28492(K)/D28493
D
E WALT declares that these power tools have been designed in compliance with: 98/37/EC, 89/336/EEC,
73/23/EEC, 86/188/EEC, EN 50144-1, EN 50144-2-3, EN 55014-2, EN 55014-1, EN 61000-3-2 &
EN 61000-3-3.
For more information, please contact D
E WALT at the address below, or refer to the back of the manual.
Level of sound pressure:
D28490 D28491 D28492(K) D28493
L
pA
(sound pressure) dB(A) 92 92 92 92
L
WA
(acoustic power) dB(A) 103 103 103 103
K
pA
(sound pressure uncertainty) dB(A) 3
K
WA
(acoustic power uncertainty) dB(A) 3
Weighted root mean square acceleration value:
D28490 D28491 D28492(K) D28493
Measured according to EN 50144 m/s
2
5.2 4.2 4.7 4.1