DeWalt D28710 Original Instructions

ENGLISH
8
• Regularly clear the ventilation slots when
working in dusty conditions. If it should
become necessary to clean the slots,
remember to unplug the tool first.
• Always store cutting discs well-protected and
in a dry place, out of reach of children.
• Faults in the machine, including guards or
cutting discs, should be reported as soon as
they are discovered.
• Only use chop saw wheel of
a max. thickness of 3.1 mm
and a max. diameter of
355 mm.
WARNING: Use of this tool can
generate dust containing chemicals
known to cause cancer, birth defects
or other reproductive harm. Use
appropriate respiratory protection.
• Always secure the workpiece properly
before cutting operation. Workpieces longer
than 1.0m shall be supported by suitable
additional table, buck or roller table.
• Consider that the wheel continues to rotate
after the machine is switched off.
• To prevent loss of control always fix the
machine to a bench using screw-clamps or
bolts of sufficient length and strength.
The following factors are of influence to noise
production:
– The material to be cut.
– The type of the cutting disc.
– The feed force.
WARNING: Take appropriate measures
for the protection of hearing.
Residual Risks
• The following risks are inherent to the use of
these machines:
– Injuries caused by touching the rotating
parts.
– Injuries caused by disruption of the cutting
disc.
• These risks are most evident:
– Within the range of operation.
– Within the range of the rotating machine
parts.
• In spite of the application of the relevant
safety regulations and the implementation of
safety devices, certain residual risks cannot be
avoided. These are:
– Impairment of hearing.
– Risk of accidents caused by the uncovered
parts of the rotating cutting disc.
– Risk of injury when changing the disc.
– Risk of squeezing fingers when opening the
guards.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Bore Diameter.
DATE CODE POSITION (FIG. 1)
The date code (v), which also includes the year of
manufacture, is printed into the housing.
Example:
2011 XX XX
Year of Manufacture
Package Contents
The package contains:
1 Chopsaw
1 Cutting disc
1 Hex key
1 Instruction manual
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fi g. 1)
WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.
a. On/off switch
b. Padlock hole
c. Operating handle
d. Lock-on button
e. Carrying handle

DeWalt D28710 Specifications

General

Quantity per pack	1 pc(s)