EasyManua.ls Logo

DeWalt D55152 - Fire, Explosion, and Overheating Risks; Preventing Fire, Explosion, and Overheating

DeWalt D55152
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
English
DANGER: RISK OF EXPLOSION OR FIRE
WHAT CAN HAPPEN HOW TO PREVENT IT
It is normal for electrical
contacts within the motor
and pressure switch
to spark.
Always operate the
compressor in a well
ventilated area free of
combustible
materials, gasoline,
or solvent vapors.
If electrical sparks from
compressor come into
contact with flammable
vapors, they may ignite,
causing fire or explosion.
If spraying flammable
materials, locate compressor
at least 20 feet (6.1 m)
away from spray area. An
additional length of hose may
be required.
Store flammable materials
in a secure location away
from compressor.
Restricting any of the
compressor ventilation
openings will cause
serious overheating and
could cause fire.
Never place objects against
or on top of compressor.
Operate compressor in
an open area at least 12"
(30.5 cm) away from any
wall or obstruction that would
restrict the flow of fresh air to
the ventilation openings.
Operate compressor in a
clean, dry well ventilated
area. Do not operate
unit indoors or in any
confined area.
Unattended operation of
this product could result in
personal injury or property
damage. To reduce
the risk of fire, do not
allow the compressor to
operate unattended.
Always remain in attendance
with the product when it
is operating.
Always turn off and unplug
unit when not in use.

Related product manuals