DeWalt D55152 - Electrical and Accessory Safety; Electrical Shock and Accessory Risks

7
English
WHAT CAN HAPPEN HOW TO PREVENT IT
• Failure to properly drain
condensed water from
air tank, causing rust
and thinning of the steel
air tank.
• Drain air tank daily or after
each use. If air tank develops
a leak, replace it immediately
with a new air tank or replace
the entire compressor.
• Modifications or attempted
repairs to the air tank.
• Never drill into, weld, or make
any modifications to the
air tank or its attachments.
Never attempt to repair a
damaged or leaking air tank.
Replace with a new air tank.
• Unauthorized modifications
to the safety valve or any
other components which
control air tank pressure.
• The air tank is designed
to withstand specific
operating pressures.
Never make adjustments
or parts substitutions
to alter the factory set
operating pressures.
Attachments & accessories:
• Exceeding the pressure
rating of air tools, spray
guns, air operated
accessories, tires, and
other inflatables can cause
them to explode or fly
apart, and could result in
serious injury.
• Follow the equipment
manufacturers
recommendation and never
exceed the maximum
allowable pressure rating
of attachments. Never use
compressor to inflate small
low pressure objects such
as children’s toys, footballs,
basketballs, etc.
WARNING: RISK OF ELECTRICAL SHOCK
WHAT CAN HAPPEN HOW TO PREVENT IT
• Your air compressor is
powered by electricity.
Like any other electrically
powered device, If it is not
used properly it may cause
electricshock.
• Never operate the
compressor outdoors when it
is raining or in wetconditions.
• Never operate compressor
with protective covers
removed ordamaged.
• Repairs attempted by
unqualied personnel can
result in serious injury or
death byelectrocution.
• Any electrical wiring or
repairs required on this
product should be performed
by a
DeWALT
factory
service center or a
DeWALT
authorized service center in
accordance with national and
local electricalcodes.
• Electrical Grounding:
Failure to provide
adequate grounding to
this product could result
in serious injury or death
from electrocution. See
Grounding Instructions
underInstallation.
• Make certain that the
electrical circuit to which the
compressor is connected
provides proper electrical
grounding, correct voltage
and adequate fuseprotection.