DeWalt DC390 Manual

23
ENGLISH
CORDLESS CIRCULAR SAW DC390
Congratulations!
You have chosen a DEWALT tool. Years of
experience, thorough product development and
innovation make DEWALT one of the most reliable
partners for professional power tool users.
Technical data
DC390
Voltage V
DC
18
Max. power output W 390
No-load speed min
-1
3,700
Blade diameter mm 165
Depth of cut mm 55
Blade bore mm 20
Bevel angle adjustment 0 - 50°
Weight (without battery pack) kg 3.15
Battery pack DE9096 DE9039
Battery type NiCd NiMH
Voltage V
DC
18 18
Capacity Ah 2.4 3.0
Weight kg 1.0 1.0
Charger DE9116
Mains voltage V
AC
230
Battery type NiCd/NiMH
Approx. charging time min 60/70
Weight kg 0.4
Fuses:
Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 13 Amperes, in plugs
The following symbols are used throughout this
manual:
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Denotes risk of electric shock.
Fire hazard.
EC-Declaration of conformity
DC390
DEWALT declares that these power tools have been
designed in compliance with: 98/37/EEC,
89/336/EEC, 73/23/EEC, EN 50144, EN 55014-2,
EN 55014-1, EN 50260, EN 60335, EN 61000-3-2
& EN 61000.
For more information, please contact DEWALT at the
address below, or refer to the back of the manual.
DC390
L
pA
(sound pressure) dB(A)* 95
L
WA
(acoustic power) dB(A) 104
Weighted RMS acceleration value m/s
2
< 2.5 m/s
2
* at the operator’s ear
Director Engineering and Product Development
Horst Großmann
DEWALT, Richard-Klinger-Straße 11
D-65510, Idstein, Germany

DeWalt DC390 Specifications

General

Type	Circular Saw
Blade Diameter	6-1/2 inches
No Load Speed	3700 rpm
Voltage	18V
Bevel Capacity	0-50 degrees
Arbor Size	5/8 inches
Max Cut Depth at 90 degrees	2-1/4 inches
Max Cut Depth at 45 degrees	1-5/8 inches