DeWalt DC410 - User Manual

DEWALT Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286 (APR04) Form No. 620640-00 DC410
Copyright © 2003, 2004
The following are trademarks for one or more D
EWALT power tools: the yellow and black color scheme; the “D” shaped air intake grill; the
array of pyramids on the handgrip; the kit box configuration; and the array of lozenge-shaped humps on the surface of the tool.
D E WALT Battery and Charger Systems
Battery Output Chargers/Charge Time – Chargeurs/Durée de charge (Minutes) – Cargadores de baterías/Tiempo de carga (Minutos)
120 Volts 12 Volts
X Indicates that the battery pack is not compatible with that specific charger.
X indique que le bloc-piles n’est pas compatible avec ce chargeur.
Una “X” indica que el paquete de baterías no es compatible con ese determinado cargador.
All charge times are approximate. Actual charge time may vary.
Read the instruction manual for more specific information.
Les durées de charge sont approximatives; la durée de charge rélle peut varier.
Lire le manuel d’utilisation pour obtenir des renseignements plus précis.
El tiempo de duración de carga es aproximado; la duración de carga real puede variar.
Lea el manual de instrucciones para obtener información más precisa.
Cat Number Voltage DW9106 DW9118 DW9107 DW9108 DW9116 DW9216 DW9117 DW911 DC011 DW0249 DW0246 DW9109
DW0242 24 X X X X X X X X X 60 60 X
DC9096 18 X X X 60 60 60 20 60 60 X X 60
DW9096 18 X X X 60 60 60 20 60 60 X X 60
DW9098 18 X X X 30 30 30 12 30 30 X X 30
DW9099 18 X X X 45 45 45 15 45 45 X X 45
DC9091 14.4 90 115 60 60 60 60 20 60 60 X X 60
DW9091 14.4 45 90 45 45 45 45 15 45 45 X X 45
DW9094 14.4 60 60 30 30 30 30 12 30 30 X X 30
DC9071 12 90 115 60 60 60 60 20 60 60 X X 60
DW9071 12 60 90 45 45 45 45 15 45 45 X X 45
DW9072 12 45 60 30 30 30 30 12 30 30 X X 30
DW9050 12 40 X X X X X X X X X X X
DW9061 9.6 60 90 45 45 45 45 15 45 45 X X 45
DW9062 9.6 45 60 30 30 30 30 12 30 30 X X 30
DW9048 9.6 40 X X X X X X X X X X X
DW9057 7.2 45 60 30 30 30 30 12 30 30 X X 30

DeWalt DC410 Specifications

General

Voltage	18V
Wheel Diameter	4.5 in
No Load Speed	6500 rpm
Weight	5.4 lbs
Spindle Lock	Yes
Spindle Thread	5/8-11 in
Battery Type	NiCd

Summary

DeWalt DC410 Cordless Cut-Off Tool Manual

Manual Introduction

Introduces the manual and provides DeWalt contact information.

General Safety Rules for Battery Operated Tools

Safety Guidelines: Work Area, Electrical, Personal, and Tool Use

Covers safety for work area, electrical, personal, and tool operation and care.

Additional Specific Safety Rules

Grinding Wheel and Accessory Safety

Specific safety advice for grinding wheels and accessory compatibility.

Important Safety Instructions for Battery Packs

Battery Handling, Charging, and Storage

Guidance on battery leakage, charging, and storage practices.

Important Safety Instructions for Battery Chargers

Charger Safety Precautions

Key safety measures for using DeWalt battery chargers.

Battery Performance Features

Tune-Up Modes: Automatic and Manual

Explains automatic and manual modes for battery performance.

Charging Procedure and Indicators

Charging Process, Indicators, and Problem Detection

Details charging steps, indicator lights, and problem resolution.

Charger Features and Notes

Charger Features and Charging Notes

Covers pack delay, storage, and important charging considerations.

Installing and Removing Battery Pack

Battery Pack Installation and Removal

How to correctly insert and remove the battery pack.

Assembly and Adjustments

Side Handle and Gear Case Adjustments

Fitting the side handle and adjusting the gear case.

Accessories Selection and Guard Mounting

Accessory Choice and Guard Installation

Guidance on choosing accessories and mounting the tool guard.

Tool Operation

Switch Lock, Trigger, and Spindle Lock

Using the lock-off button, trigger, and spindle lock.

Grinding Wheel and Flap Disc Use

Mounting and Using Grinding Wheels

Procedures for mounting and using grinding wheels.

Edge Grinding and Surface Finishing

Grinding, Finishing, and Pad Mounting Techniques

Techniques for edge grinding, surface finishing, and pad mounting.

Sanding Paint Precautions

Paint Sanding Safety and Cleanup

Safety measures for sanding paint and environmental cleanup.

Wire Brushes and Wheels

Mounting and Using Wire Brushes and Wheels

Procedure for mounting and using wire brushes and wheels.

Cutting Wheels and Guards

Mounting Cutting Wheels and Type 1 Guard

Procedures for mounting cutting wheels and the Type 1 guard.

Maintenance, Repairs, and Warranty

Cleaning, Repairs, Accessories, and Warranty

Covers tool care, repairs, accessory purchase, and warranty information.